Before you proudly go posting photos of your Ming vase online, you should be aware that computer-savvy burglars can likely use that photo to find out where you live. The same goes for photos or videos of your kids, yourself, or anything else that you don’t want strangers knowing how to locate. The practice of tracking people via their posted images is an example of “cybercasing”, and is possible because many digital cameras and smart phones, including the iPhone, automatically geotag their images by embedding the longitude and latitude at which they were taken. Even when uploaded to a website, the images still retain this information. By plugging the coordinates into a service like Google Street View, getting an address or an identifying landmark is entirely possible.

This disturbing fact was recently announced in a report published by the International Computer Science Institute (ICSI). Researchers Gerald Friedland and Robin Sommer wrote that they successfully obtained the home addresses of people who had posted photos in ads on Craigslist, despite those people having opted to keep their addresses hidden in their postings.

Creepier still, they were also able to obtain addresses where home videos of children had been shot, by searching under the tag “kids” on YouTube. They then proceeded to search for recent videos from those same users, that had been shot over 1,000 miles away. Within 15 minutes, they were able to determine that 13 of these video posters were likely still away on vacation, leaving their homes available for burglary.

While iPhones do geotag by default, it is possible to turn the feature off. The folks over at I Can Stalk U (they’re against stalking, not in favor of it) can show you how. For other phones and cameras, a Googling or a look through your user’s manual should tell you what you need to know.

Sourced & published by Henry Sapiecha

Press release from OSRAM Opto Semiconductors - 2010-04-28

Powerful LED flash for cell phones

OSLUX now with UX:3 chip technology

The new OSLUX from OSRAM Opto Semiconductors is brighter and smaller than ever before and provides extremely uniform light thanks to a chip fabricated in state-of-the-art UX:3 technology. Together with an optimized lens it not only ensures that the LED is 50 percent brighter than the predecessor model but also that the light is much more evenly distributed and can therefore illuminate a wide area.

The new OSLUX has an area of 3.9 mm² and a height of only 2.5 mm (previously 3 mm) but is 50 lx brighter. This takes its output to an impressive 150 lx. The light is uniformly distributed in the flash; the usual round spot in the center is completely absent. “Our OSLUX is therefore perfect for the fast-growing design-based smartphone and cell phone segment”, said Gunnar Klick, Marketing Manager Consumer at OSRAM Opto Semiconductors. “Even extremely thin phones can now be equipped with a powerful LED flash so they can deliver pictures of superb quality”.

The LED is available in two versions with different lenses. These are already integrated in the LED and are matched to the beam characteristics of the top-emitting UX:3 chips. The subject of the picture is illuminated in a uniform rectangular pattern. The distribution of the light depends on the lens used: 40% or 20% of the center brightness is possible in the corners. At a distance of one meter the LED flash uniformly illuminates a diagonal of 90 cm, which is sufficient to produce razor-sharp pictures even in low light conditions.

The impressive brightness is the result of new UX:3 chip technology that makes the LED capable of handling high currents and gets even more light from the chip. What’s more, the light is more evenly distributed over the surface compared to previous chip technologies. The new OSLUX is therefore considerably more efficient at high currents than previous LEDs and offers impressive luminous efficacy in a small area.

With the new OSLUX OSRAM’s LED portfolio for flash applications is even better tailored to the latest trends in which mobile slimline terminals require small powerful light sources. For users who want to supply their own lens packages there is the CERAMOS which has no lens.

Press contact:
Marion Reichl
Headquarter, Europe

Tel: +49 (0) 941 – 850 – 16 93
Fax: +49 (0) 941 – 850 – 33 05
Email: marion.reichl@osram-os.com

Sourced and published by Henry Sapiecha 23rd May 2010

Protect Against Deadly Chemicals?

Cyber Forensic Researchers

Make The Call:

Crime Scene Evidence Is Quickly

Extracted From Mobile Phones

On this day in 1876, 29-year-old Alexander Graham Bell receives a patent for his revolutionary new invention–the telephone.

The Scottish-born Bell worked in London with his father, Melville Bell, who developed Visible Speech, a written system used to teach speaking to the deaf. In the 1870s, the Bells moved to Boston, Massachusetts, where the younger Bell found work as a teacher at the Pemberton Avenue School for the Deaf. He later married one of his students, Mabel Hubbard.

While in Boston, Bell became very interested in the possibility of transmitting speech over wires. Samuel F.B. Morse’s invention of the telegraph in 1843 had made nearly instantaneous communication possible between two distant points. The drawback of the telegraph, however, was that it still required hand-delivery of messages between telegraph stations and recipients, and only one message could be transmitted at a time. Bell wanted to improve on this by creating a “harmonic telegraph,” a device that combined aspects of the telegraph and record player to allow individuals to speak to each other from a distance.

With the help of Thomas A. Watson, a Boston machine shop employee, Bell developed a prototype. In this first telephone, sound waves caused an electric current to vary in intensity and frequency, causing a thin, soft iron plate–called the diaphragm–to vibrate. These vibrations were transferred magnetically to another wire connected to a diaphragm in another, distant instrument. When that diaphragm vibrated, the original sound would be replicated in the ear of the receiving instrument. Three days after filing the patent, the telephone carried its first intelligible message–the famous “Mr. Watson, come here, I need you”–from Bell to his assistant.

Bell’s patent filing beat a similar claim by Elisha Gray by only two hours. Not wanting to be shut out of the communications market, Western Union Telegraph Company employed Gray and fellow inventor Thomas A. Edison to develop their own telephone technology. Bell sued, and the case went all the way to the U.S. Supreme Court, which upheld Bell’s patent rights. In the years to come, the Bell Company withstood repeated legal challenges to emerge as the massive American Telephone and Telegraph (AT&T) and form the foundation of the modern telecommunications industry.

Sourced and published by Henry Sapiecha 11th March 2010

Sourced and published by Henry Sapiecha 8th Sept 2009

Passes Down Cultural Heritage to

Future Generations

Japanese researchers prototyped a memory system that can store large volumes of data for more than a thousand years.

The system, “Digital Rosetta Stone (DRS),” was announced June 16, 2009, by Keio University, Sharp Corp and Kyoto University at the 2009 Symposium on VLSI Circuits, which is taking place in Kyoto, Japan (lecture number: C3-3). They stacked wafers mounted with mask ROM and packaged it with SiO₂. Power supply and signal communication are conducted by wireless.

To store various cultural heritage that has so far been created by mankind as digital information and hand it down to posterity, it is necessary to develop a memory system that can store data for more than a thousand years and has a capacity of 1 Tbit or more and a data access speed of 100Mbps or more, according to the researchers.

In the case of HDDs, data could be lost in four to 40 years due to the influence of magnetic field. And data stored in an optical disc could be lost in 30 to 100 years when affected by oxygen or moisture. On the other hand, semiconductor devices can keep data intact for a thousand years or more if the humidity around the chip is kept at 2% or less.

Thus, the researchers proposed the idea of saving data on the mask ROM with electron-beam direct-writing technology, stocking the wafers and packaging them with SiO₂ to form a “slate.” When a wafer (reader) for reading data is attached to the slate, it becomes possible to supply power and communicate signals by wireless.

If four 15-inch wafers made by using 45nm CMOS technology are stacked, the memory capacity will be 2.5 Tbits.

This time, the researchers utilized 0.18?m CMOS technology and prototyped test chips corresponding to the slate and the reader. The size of the test chips is 5 x 5mm. The diameter of the inductor is 2mm for power supply and 0.4mm for data communication. And the capacity of the mask ROM is 1 Mbit.

They succeeded in providing 56mW power to the slate by four-channel wireless transmission when the distance between the slate and the reader is 0.2mm. By this method, a data transmission speed of 150Mbps can be realized.

• [VLSI] Univ of Tokyo Doubles SSD Random Write Speed
• [VLSI] NEC Develops Technology to Slash Write Current of Embedded MRAM

Sourced and published by Henry Sapiecha 1st July 2009

GLOWS IN THE DARK??

Oregon researchers have created the first genetically modified monkey. ANDi, a playful, coffee-colored rhesus monkey born on October 2nd 2000, has been engineered to carry a gene from another species. The work demonstrates that a foreign gene can be delivered and inserted into a primate chromosome. The researchers anticipate that gene insertions in the monkey will lead to primate models of human diseases—like Alzheimer’s, diabetes, heart disease and obesity—that will offer a more robust testing ground for new drugs, gene therapy and modified stem cells. ANDi (DNA inserted spelled backward) is the first transgenic monkey. “Our ultimate goal is to produce human disease models. Primates show human pathology better than mice, which, in many cases, are the only systems we have for modeling human diseases,” says Anthony Chan, of the Oregon Regional Primate Research Center, in Beaverton. The report is published in this week’s issue of Science. Chan’s goal was to show that a foreign gene can be inserted into a monkey’s chromosome and produce a functional protein. The GFP gene was chosen because the protein it produces emits a fluorescent green glow that can easily be seen through a microscope. Eventually scientists want to insert human disease genes and study disease progression in monkeys, says Chan. Tissue samples taken from ANDi’s cheek, hair, umbilical cord and placenta confirm that the cells contain the GFP gene and corresponding mRNA; the molecule that bridges the gap between DNA and protein. However, when the tissue was examined under the microscope, no green protein could be seen. “Maybe the quantity of protein is too small to be seen or maybe the mRNA is not being translated,” says Chan. The team will continue to monitor ANDi for GFP; Some transgenic animals do not produce any foreign protein until after the first year. (LEFT)Virus particles carrying the GFP gene are injected into the unfertilized egg. The gene (white) is released from the virus and incorporated into the chromosome. (RIGHT)About 6 hours after introducing the virus scientists artificially fertilize the egg by injecting a sperm from a male rhesus. The fertilized egg then begins to grow and divide. Two to three days later when the egg has divided twice and become a four-celled embryo it is implanted into a surrogate mother. Courtesy Oregon Regional Primate Research Cente VIEW THE LINK BELOW FOR MORE

• Introducing ANDi: The first genetically modified monkey
  Oregon researchers have created the first genetically modified monkey. ANDi, a playful, coffee-colored rhesus monkey born on October 2nd 2000, …
  www.genomenewsnetwork.org/articles/01_01/ANDi.shtml
• 
  
• Sourced and published by Henry Sapiecha 29th May 2009
• 
  

STATE COLLEGE, Pa. (UPI) — U.S. scientists say they’ve created tunable fluidic micro lenses that can focus light at will while remaining stationary and can be fabricated on a chip.

The Pennsylvania State University research engineers said such fluidic lenses can be used for many applications, such as counting cells, evaluating molecules or creating on-chip optical tweezers. The lenses might also provide imaging in medical devices, eliminating the necessity of moving the tip of a probe, they added.

The researchers, led by Assistant Professor Tony Jun Huang, said conventional, fixed focal length lenses can focus light at only one distance and the entire lens must move to focus on an object or to change the direction of the light. Fluidic lenses, however, can change focal length or direction in less than a second while remaining in the same place.

“We use water and a calcium chloride solution because they are readily available and safe and their optical properties have been well characterized,” said Huang.

The research that included graduate students Sz-Chin Lin, Michael Lapsley, Jinjie Shi, Bala Juluri and Xiaole Mao was reported in a recent issue of the journal Lab on a Chip.

Copyright 2009 by United Press International

Sourced and published by Henry Sapiecha 18th May 2009

Chew Chew the gastrobot (Pic: New Scientist)

Related Stories

• Evolution of the shape-shifters,
• Microrobots swim with the tide,

At last, a robot that is powered by food – but watch out, this gastrobot’s ideal food is flesh!

According to this week’s New Scientist, a researcher at the University of South Florida has developed a 12-wheeled monster called Chew Chew, with a microbial fuel cell stomach that uses E. coli bacteria to break down food and convert chemical energy into electricity.

“Turning food into electricity isn’t unique,” says Wilkinson. “What I’ve done is make it small enough to fit into a robot”.

The microbes produce enzymes that break down carbohydrates, releasing electrons which are harnessed to charge a battery by a reduction and oxidation reaction.

Wilkinson says this is analogous to blood supply and respiration in a mammal – but delivering electrons instead of oxygen.

Gastrobot consists of three 1-metre long wheeled wagons complete with pumps for redox solution, battery bank, oesophagus, ultrasonic eyes, mouth, DC motor and E.coli powered stomach.

Unfortunately, the microbial fuel cell doesn’t produce enough power to actually move Chew Chew. Instead, the electricity is used to charge the batteries and only when these are fully charged does can the robot move. When the batteries are drained, the cycle must then be repeated.

According to New Scientist, early applications for gastrobots are likely to include mowing lawns – grazing on grass clippings for fuel.

The ideal fuel in terms of energy gain is meat, says inventor Stuart Wilkinson, but at the moment Chew Chew lives on sugar cubes.

Catching meat would require the robot to produce more energy and besides Wilkinson isn’t so sure it’s good to give gastrobots a taste for meat.

Conversion to eat carion flesh or decaying corpses is another option.

“Otherwise they’ll notice there’s an awful lot of humans running around and try to eat them,” he warns.

Tags: science-and-technology

Sourced and published by Henry Sapiecha 13th May 2009